Optional Anchors For The Cds ® Nano Joints - Albrecht Individual Cds Joint For Dynamic Redression Gebrauchsanweisung

Individual
Instructions For Use
2.2.4. Optional anchors for the CDS
1 Nano T - anchor short
Nano T anchor long
2
3 Nano V - anchor short
4 Nano V anchor long
Nano anchor straight
5
1 1
5 5
7 7
Note: The explained steps must be performed immediately with any
anchor that is assembled for the corresponding joint. For simplicity, only
the straight anchor is shown.
Note: For each individual special construction joint there is a suitable
follower from albrecht GmbH.
54 00800 03032900 – INTERNATIONAL SERVICE HOTLINE
Nano joints
®
Nano adapter anchor straight
6
7 Nano anchor straight elongated
hole
2 2
6 6
3 3 4 4