Activating The Spring Tension; Deactivation Of Spring Tension - Albrecht Individual Cds Joint For Dynamic Redression Gebrauchsanweisung

Individual
Instructions For Use

3.2. Activating the spring tension

To activate the spring tension, set the switch to "on".
1
Move the brace to Extension or Flexion against the desired direction of action of the spring
2
force until you feel a slight resistance. Overcome this to activate the spring force.
1 1
ON ON

3.3. Deactivation of spring tension

Before putting on or taking off the brace, you must deactivate the spring tension.
1 Set the switch to "off".
Move the joint to Extension or Flexion against the desired direction of action of the spring
2
force.
This movement adjusts the position of the activation mechanism.
The patient can reactivate the spring force in this position. (See 3.2)
1 1
OFF OFF
Activating or deactivating the spring tension does not change the strength of the spring tension.
66 00800 03032900 – INTERNATIONAL SERVICE HOTLINE
2 2
2 2