Important Tips; What's In The Box - Zendure Solarflow 2400 Ac+ Bedienungsanleitung

EN

4. Important Tips

√
Grid-tied Regulation: The system is grid-tied. Please check if it is allowed in your area.
√
√
√
√
Protect from Direct Sunlight: Ensure that the SolarFlow 2400 AC+ is placed in a shaded area to
avoid rapid temperature increases that could affect performance.
Accessory Check: Verify the necessary accessories prior to installation, as some may need to
be purchased separately.
€
Download the Zendure App: After installation, download the Zendure app to unlock additional
smart features and remote control options.
Grid Connection Time: Once installation and the initial startup are complete, allow
approximately 1 minute for the SolarFlow 2400 AC+ to connect to the grid.
Set Safe AC Output: Use the Zendure app to configure the AC output for home use. Ensure the
output complies with your country or region's safety power limits to prevent overloads.
Shutdown Procedure: Before removing the SolarFlow 2400 AC+, press and hold the button for
6 seconds to turn off the device, and disconnect all power cables for safety.
Optimal Operating Conditions: It is recommended to use this product in environments ranging
from 15°C to 30°C, away from water, heat sources, or sharp objects that could cause damage.
Long-Term Storage: For long-term storage, discharge the battery to 30% and recharge it to 60%
every 3 months. If it drops below 1% after use, recharge it to 60% before storing. Prolonged low
60%
power can cause irreversible damage and shorten the battery's lifespan.
No Disassembly: Do not attempt to disassemble the product. For repairs or servicing, consult
official Zendure channels. Improper handling could pose risks of fire or personal injury.
Low SOC Protection: The battery has a 5% discharge limit to prevent over-discharge and
5 %
extend its lifespan.

5. What's in the Box

SolarFlow 2400 AC+
2
X
2
X
Bracket Kite
Before unpacking, check the packaging for any damage (e.g., holes or cracks) . If damaged , do not unpack and
contact Zendure service team immediately.
After unpacking, verify that all items are intact, complete. If anything is missing or damaged, contact customer
service.
*1
Wrench for Removing Solar
Connector and AC Connector *1
User Manual
*1
5
3m 16A AC Power Cable
*1