Original Instructions "Hammer Drill; Symbols And Abbreviations; Safety Rules; General Safety Instructions For Power Tools - Kress 550 HMSL Original Bedienungsanleitung

Original instructions "Hammer drill"

Symbols and abbreviations

1. Symbols and abbreviations
The symbols used in these instructions and, if ap-
plicable, on the power tool serve to bring your at-
tention to potential dangers when working with this
power tool. You must understand the significance
of these symbols/notes and comply with them in
order to make its use more efficient and safer.
The safety warnings, notes and symbols are not a
substitute for regulation measures for accident
prevention.
Symbols
User action
Action for working with the device,
start with light pressure and increase
the pressure slowly until the desired
operation is achieved.
Follow the instructions in numerical
order.
OFF / Standstill
ON / Working position
Maintenance and installation instruc-
tions - Rotary motion
Tasks or actions which require a lock.
Recommended by the manufacturer
Further information see Page 26
Illustrated or described accessories
are not necessarily included in the
scope of delivery
Technical modifications reserved
Especially important note for safety.
Always follow this note, otherwise it
could result in severe injury.
Warning of dangerous electrical volt-
age
Warning of hot surfaces
-WARNING-
For a potentially dangerous situation which could
lead to physical injury or material damage.
-NOTE-
Modification notes and other useful information.

2. Safety rules

General safety instructions for power
tools
WARNING!
Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in warnings refers to your
mains-operated (corded) power tool or battery-op-
erated (cordless) power tool.
Work area safety
Keep work area clean and well lit.
Cluttered and dark areas invite to accidents.
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust.
Power tools create sparks which may ignite dust or
fumes.
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.

Electrical safety

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
English 13
EN
BH-EN / 1011