Assign An Ip Address - Axis A1001 Installationsanleitung

If you do not know the IP address, use AXIS IP Utility to locate the product on the
network. For information about how to discover and assign an IP address, see Assign an
IP Address. This information is also available from the support pages at axis.com/support
Note
To show Bonjour as a browser bookmark, go to Safari > Preferences.
3. Enter your username and password. If this is the first time the product is accessed, the
root password must first be configured.
4. AXIS Entry Manager opens in your browser. The start page is called the Overview page.
How to access the product from the Internet
Once connected, the Axis product is accessible on your local network (LAN). To access the product
from the Internet you must configure your network router to allow incoming data traffic to the
product. To do this, enable the NAT-traversal feature, which will attempt to automatically configure
the router to allow access to the product. This is enabled from Setup > Additional Controller
Configuration > System Options > Network > TCP/IP > Advanced.
For more information about NAT trasversal for IPv4, see the product's User Manual.
For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/support
See also AXIS Internet Dynamic DNS Service at www.axiscam.net

Assign an IP Address

Default IP Address
The Axis product is designed for use on an Ethernet network and requires an IP address for access.
Most networks have a DHCP server that automatically assigns IP addresses to connected devices.
If your network does not have a DHCP server the Axis product will use 192.168.0.90 as the
default IP address.
Recommended Methods in Windows®
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis
products on the network and assigning them IP addresses in Windows®. Both applications are free
and can be downloaded from www.axis.com/techsup
AXIS IP Utility – Small Installations
AXIS IP Utility automatically discovers and displays Axis products on your network. The application
can also be used to manually assign a static IP address.
AXIS A1001 Network Door Controller
37
EN