Axis A1001 Installationsanleitung Seite 30

AXIS A1001 Network Door Controller
Note
• Wireless locks are not sold and distributed by Axis Communications. For support and
training related to wireless systems, contact relevant manufacturers' partner.
• The Axis product is considered standalone, and does not require constant connection to a
computer for proper operation. The use of a connected computer is for local programming,
downloading, and supplemental monitoring purposes only.
Wall and Ceiling Mount
NO TICE TICE
NO NO TICE
If installing the door controller on a wall, make sure the cut-out for the cables is facing
downward.
1. If using a junction box, install the junction box before installing the network door
controller. For UL compliance, the junction box shall be UL Listed.
2. If required, remove the cover screw, insert a slotted screwdriver into the cover removal
slot and remove the cover. See Hardware overview on page 14.
3. Make marks for the screw holes in the ceiling/wall, using the base as a template.
4. If required, drill holes for the screws.
5. Mount the base on the wall or ceiling. Make sure that the screws and plugs are
appropriate for the material (e.g. wood, metal, sheet rock, stone).
30