Connection Diagrams - Axis A1001 Installationsanleitung

AXIS A1001 Network Door Controller
door controller is removed from the wall or ceiling. For information about how to configure
alarms and events, see the User Manual.

Connection Diagrams

Connect devices according to the hardware pin chart generated through the hardware
configuration. For more information about hardware configuration and the hardware pin chart, see
Configure the Hardware on page 41.
Auxiliary Connector
1
0 V DC (-)
2
DC output: 3.3 V, max 100 mA
A
I/O configured as input
B
I/O configured as output
Supervised Inputs
To use supervised inputs, install end of line resistors according to the diagram below.
28