Becker Centronic SunWindControl SWC52 Montage & Betriebsanleitung Seite 35

Operating mode
The current wind and/or sunlight settings can be seen in the display.
OK button
Press the OK button to store the current values displayed.
To activate the test mode, press the OK button and hold for 5 seconds. In addi-
tion, the MANUAL/AUTO sliding switch must be set to AUTO.
+/- buttons
The following operations are possible using the + and - buttons:
• Menu -> change value
• Auto mode -> request information
• + button -> next automatic switching time s
• - button -> next automatic switching time t
MENU button
By pressing the MENU button, you can see an overview of the menu or the op-
erating mode.
The currently displayed values are not stored.
RESET button
Press the RESET button (with a ballpoint pen or similar object) to restore the
device's factory settings (SWC52).
Exception: Function and language selection menu.
Time/date menu
TIME/DATE
This menu is used to set the time and the date.
Program menu
PROGRAM
The FUNCTION menu allows you to choose between switching and blocking
times.
These can be set via the PROGRAM menu.
SWITCHING TIME
Programmable switching times for extension and retraction of awnings.
de
en
fr
nl
35