Mova RLP53HE Bedienungsanleitung Seite 11

Before Use
EN
1. Place the Base Station and Connect to an Electrical Outlet
Place the base station in a location that is as open as possible with a good
Wi-Fi signal. Leave enough space as shown in the figure and remove any
objects in the shaded area. Insert the power cord into the base station and
plug it into the socket.
Note:
· Make sure that no objects might block the signaling area.
· To prevent water stains from wetting wood floors or carpets, placing the
base station on tile floors or marble floors is recommended.
11
＞1.5m
Firmly insert the power cord
upwards until the indicator turns on.
2. Install the Ramp Extension Plate
Note: Ensure the washboard filter is installed into place.
3. Remove Robot Protections and Install the Mop Assembly
④
②
①
③
Washboard Filter