Linde E300 Gebrauchsanweisung Seite 4

ENGLISH
INSTRUCTION FOR USE: EXTENSION HEADER RAIL
1. GENERAL
EN
1.1. INFORMATION ABOUT THIS INSTRUCTION MANUAL
This instruction is only intended for use with the Extension Header Rails
•
E300R (right version) and E300L (left version)
This type of Extension Header Rail is suitable to extend the gas inlets of a gas supply manifold from Linde
Redline.
These instructions enable to operate the system safely and efficiently. These instructions form an integral part
of the system and must always be kept with the system and within easy reach of staff.
Prior to commencing any work, the staff must read these instructions carefully and understand the contents.
Observance of all the safety information and instructions for operation that are contained in these instructions
is essential to ensure work safety.
Local accident prevention regulations and general safety regulations governing the use of the system must
also be observed.
Illustrations and images in these instructions serve to ensure a basic understanding of the system and may
differ from the actual version.
1.2. INFORMATION ABOUT THIS EXTENSION HEADER RAILS
Extension Header Rails of this type are only suitable for gases defined as standard gases. The maximum
working pressure is 300 bar.
Standard gases for the brass blank version are industrial, inert, flammable and oxidizing gases and/ or their
mixtures. Not allowed are the components for corrosive and/ or toxic gases and/or their mixtures.
Standard gases for brass chrome plated version are industrial, inert, flammable and oxidizing gases and/
or their mixtures. Not allowed are the components for corrosive and/ or toxic gases and/or their mixtures.
For stainless steel version standard gases are also toxic gases and/ or their mixtures, corrosive gases are
no allowed.
When using toxic or corrosive gases an additional purge gas system is mandatory.
E300: Included is a 4-port shut-off valve with metal diaphragm.
1.3. EXPLANATION OF SYMBOLS
SAFETY INFORMATION
Safety information is highlighted by symbols in these instruc-
tions. This safety information is preceded by signal words that
define the extent of risk.
DANGER!
This combination of symbol and signal word indicates an im-
mediately dangerous situation that will cause death or severe
injury if not avoided.
WARNING!
This combination of symbol and signal word indicates a pos-
sibly dangerous situation that can cause death or severe injury
if not avoided.
BEWARE!
This combination of symbol and signal word indicates a pos-
sibly dangerous situation that can cause minor injury if not
avoided.
4/40