Specifications; General Features - Signat ROM2 Bedienungsanleitung

1.1

General Features

Platinum RCA jacks, speaker and power terminals
BIC balanced input circuitry
ENS electronic noise suppression, adjustable for maximum effectiveness
2 Ohm stereo / 4 Ohm mono stability
Turn-on delay, turn-off muting
Protection circuitry against thermal and electrical overload, short circuit, DC-offset
SIGNAT power/protection indicator
Selectable crossover HPF/LPF
Subsonic filter
RCA line output
Adjustable input sensitivity
PWM Mosfet power supply +12 V DC, negative ground
1.2

Specifications

Power output @4Ohm
Power output @2Ohm
Bridged power
THD
Frequency reponse (-1dB)
High pass filter (HPF)
Low pass filter (LPF)
Subsonic filter
Input sensitivity
Input impedance
Dimensions (lxwxh, mm)
Features and specifications are subject to change without any notice
1 Features
ROM2
200W X 2
400W X 2
800W X 1
0.05%
10Hz - 40KHz 20Hz - 20KHz
50Hz - 250Hz 50Hz - 250Hz
50Hz - 250Hz 50Hz - 250Hz
10Hz - 50Hz 10Hz - 50Hz
0.15V - 5V
10K Ohms
320x250x49.5 320x250x49.5
5
ROM4
80W X 4 50W X 4 + 120W X 1
160W X 4 100W X 4 + 200W X 1
320W X 2 200W X 2 + 200W X 1
0.05%
10Hz - 40KHz
50Hz - 250Hz
50Hz - 250Hz
0.15V - 5V
10K Ohms
400x250x49.5
GB
ROM5
0.05%
10Hz - 50Hz
0.15V - 5V
10K Ohms