Cleaning; Cleaning The Surface; Cleaning The Interior; Cleaning The Control Panel - Cgs Instruments Sam-1000_Dp2 Bedienungsanleitung

10 Cleaning

10.1 Cleaning the surface

CAUTION
Make absolutely sure that no water enters the device while cleaning .
Before cleaning the device, disconnect it from the power mains!
The front panels are washable . We recommend using a sponge or cloth soaked in a mild detergent .

10.2 Cleaning the interior

After opening the device, you can, if necessary, carefully blow out the interior with a compressed
air gun .

10.3 Cleaning the control panel

Clean with warm or hot water (if necessary, add a slightly acidic, neutral or slightly alkaline cleaning
agent) . Do not use abrasive cleaners or a high-pressure cleaner . Only limited resistance to organic
solvents (e .g . alcohol, benzine, etc . ) .
Product:
SAM-1000_DP2 Revision 1 . 1 – Issue June 2016
E
81/94