CGS Instruments SAM-1000_DP2 Bedienungsanleitung Seite 74

6.2 Flowmeter
• The actual operating pressure and the medium temperature of the system must not exceed the maxi-
mum values of the fl owmeter .
E
• Impact shocks are to be avoided (risk of broken glass) . -> Slowly increase the gas pressure .
• Use the needle valve to adjust the desired fl ow rate .
• The fl ow rate value is read at the upper edge of the fl oat .
shape A III ball
reference point
Product:
SAM-1000_DP2 Revision 1 . 1 – Issue June 2016
74/94