Transport Inspection; Storage - Cgs Instruments Sam-1000_Dp2 Bedienungsanleitung

3.3 Transport inspection

Important:
Check the entire shipment for completeness and possible transport damage immediately upon arrival .
Failure to observe the following instructions in the event of damage shall cease the obligation of the
insurer to render performance .
• Even in case of suspected damage: Only acknowledge receipt with reservation (e .g . including shipping
documents) by specifying the alleged damage .
• Assert claims for compensation against third parties:
Carriers, freight forwarders, warehouse keepers:
- demand joint damage inspection
- request a certifi cate of damage
- hold these liable for damages in writing and describe the damage in detail,
namely:
- in case of visible damage prior to accepting delivery of the goods
- in case of no apparent outward damage immediately upon discovery
• Set deadlines for complaints and observe these!
• Ensure mitigation of incurred damage and avoidance of further damage .
• Immediately consult an insurance adjuster to record the damage and provide advice for securing claims
against third parties and for measures to mitigate the damage incurred .
• Never change the status of the consignment and its packaging until the arrival of the adjuster insofar
this is not required to mitigate and prevent further damage .
• Immediately notify the insurer about the insurance case and quickly submit the complete claim
documents to accelerate claims settlement (latest time before any preclusion and/or limitation periods
for claims against third parties) .

3.4 Storage

After unloading, the packages must be stored until installation in accordance with the shipping markings .
Packed machine parts and accessories may not be unpacked .
Observe the applicable regulations for storage:
• Store in a cool dry place . Maximum humidity: 60 % .
Make sure the packages are not stored outdoors .
Also ensure that the storage room fl oor is dry during storage .
• Protect against direct sunlight . Storage temperature 5° C to 35 °C .
• Store in a dust-free location!
• Avoid mechanical shock and damage .
• For longer storage over 3 months, check the conservation measures .
In case of aggressive weather conditions, conservation must be renewed if necessary .
Product:
SAM-1000_DP2 Revision 1 . 1 – Issue June 2016
E
57/94