CGS Instruments SAM-1000_DP2 Bedienungsanleitung Seite 70

DP Slave
The Profibus address of SAM-1000_DP2 is set in the field "DP slave/address" . With touching the button
E
"Apply" the actual address of SAM-1000_DP2 is overwritten and the system restarts . The address should
be set before the SAM-1000_DP2 is connected with the Profibus . Otherwise there can be address con-
flicts, if this address exists on Profibus already .
The password can be adjusted by touching the button „Change Password" .
Product:
SAM-1000_DP2 Revision 1.1 – Issue June 2016
70/94