Cleaning; Cleaning The Surface; Cleaning The Interior; Cleaning The Control Panel - Cgs Instruments Sam-1000_Dp Bedienungsanleitung

E

10 Cleaning

10.1 Cleaning the surface

CAUTION
Make absolutely sure that no water enters the device while cleaning.
Before cleaning the device, disconnect it from the power mains!
The front panels are washable. We recommend using a sponge or cloth soaked in a mild detergent.

10.2 Cleaning the interior

After opening the device, you can, if necessary, carefully blow out the interior with a compressed
air gun.

10.3 Cleaning the control panel

Clean with warm or hot water (if necessary, add a slightly acidic, neutral or slightly alkaline cleaning
agent). Do not use abrasive cleaners or a high-pressure cleaner. Only limited resistance to organic
solvents (e.g. alcohol, benzine, etc.).
Product:
SAM-1000_DP Revision 1.2 – Issue July 2016
76/88