CGS Instruments SAM-1000_DP2 Bedienungsanleitung Seite 53

Proper maintenance means:
• Adherence to the maintenance plan (see Chapter: Maintenance)
• Maintenance by trained maintenance personnel
E
• Use of original CGS spare parts
Maintenance should be performed by the CGS service technician or, on the operator side, by CGS-trained
service technicians .
The warranty is void in case of:
• improper use
• use of unauthorised equipment
• faulty connection and existing components that are not part of the scope of delivery and service
• failure to use original spare parts and accessories
• retrofitting that was not performed by CGS itself
• non-compliance of prescribed maintenance work
The contents reflect the state of the art at the time of publication .
We reserve the right to make any technical changes due to further development .
1.8 Delivery information
The respective scope of delivery is listed in the shipping documents accompanying the delivery based
on the valid contract .
Please observe the corresponding information on the packaging material when opening the packaging .
Check the delivery for completeness and intactness . In particular, you should, where applicable, compare
the order number on the nameplates with the ordering data .
If possible, please keep the packaging materials so that you can use it for future return deliveries
(see Chapter: Packaging and transport) .
1.9 Norms and regulations
The specification and production of this device were based on the harmonised European Norms whenever
possible . If no harmonized European Norms have been applied, then the norms and regulations of the
Federal Republic of Germany shall apply .
When using this product outside the scope of these norms and regulations, you must comply with the
norms and regulations valid in the operator's country .
Product:
SAM-1000_DP2 Revision 1.1 – Issue June 2016
53/94