Creality CR-Scan Raptor Benutzerhandbuch Seite 16

6. Begin the Scanning Process
Press the
o
the software interface.
Move the scanner around the object slowly, keeping the scanner pointed at the
o
object while ensuring it remains in the scan preview window.
7. Complete the Scan and Process the Model
To finish scanning, press and hold the
o
or click
Once scanning is complete, the Creality Scan software will process the captured
o
data. For best results, it is recommended to set the point distance to 0.1mm to
create a detailed model.
After processing, you'll have a complete 3D model of the object. The final model
o
can be saved and exported for further use.
Note:
These key operations can also be managed through the Creality Scan software. For more
detailed instructions on specific software functions, visit:
https://wiki.creality.com/en/3d-scanner
(play) button on the scanner or click the
in the software.
(play) button for more than 3 seconds,
16
Start Scan button in