Device Connection - Creality Cr-Scan Raptor Benutzerhandbuch

Device Connection

•
Adapter Installation and Connection
Users can select the appropriate converter according to their local standards. To attach the
converter:
1. Press the converter lock.
2. Push the selected converter upward until a click is heard, indicating it's securely in
place.
(Refer to the image for the detailed steps of this operation.)
•
Device Connection
1. Insert the USB-C interface of the data cable into the device and tighten the thumb
screws.
2. Connect the DC power cord female end of the data cable to the DC male end of the
adapter.
3. Plug the adapter into a power outlet.
10