Creality CR-Scan Raptor Benutzerhandbuch Seite 13

First Scan
1. Connect the Device and Launch Creality Scan Software
Make sure the device is properly connected to the computer using the USB cable,
o
and then launch the Creality Scan software.
2. Click "New Scan" in Creality Scan
Once the software is running, select the "New Scan" option to start the scanning
o
process.
This button is located on the main screen of the software, as shown in the
o
example image.
3. Enter the Project Name and Select Folder Path
In the pop-up bar, input the project name and choose the folder path where the
o
scanned data will be saved.
After you've selected the desired location, click the OK button to confirm your
o
settings.
13