HOMCOM 800-116V70 Bedienungsanleitung Seite 10

EN
Instruction for operation the control panel
1. Plug your ice-cream maker into the main power outlet, all the LED lights will be on for
3 seconds, after that, the
some of the lights in circle will be on. The program defaults to soft ice cream function.
2.You can let the paddle work only first to blend the ice-cream material completely. Press
the "Stir" button
means the default time for paddle work is 5 minutes, you can press the "Start/Stop"
button to start/stop stirring, and also you can use the"TlME+"
to change the paddle working time, one time is 3 minutes.
If you don't need the paddle work first to blend the ice-cream material, just move to the
next step.
3.The default set is soft ice-cream function, the
AA button to change to hard ice-cream function, press the
milkshake function, as the same way, press the
only.
4.Press the"START/STOP"
according to the above setting program. Press the "START/STOP"
seconds, you will stop the function.
During the compressor running, you can also press the Stir button to Start or Stop the
paddle rotating.
After starting to make the soft ice-cream, it will run according to the default time varied
with the ambient temperature. And you can press the "TIME+"
change the ice-cream making duration time according to your personal taste.
light will be on, LED display window will show "35:00",
, the LED display window will display like the following picture. lt
button to turn on the unit, the unit will start to work
9
or "TIME-"
slight is on. You can also press the
button to change to
button to change to stir function
or "TIME-"
button
button for two
button to