5. Press the UP or DOWN buttons to select the number of players. The colors of the LEDs at the door panels
are assigned to the 8 players as below.
Player 1 – Purple
Player 2 – Green
Player 3 – Yellow
Player 4 – Cyan
Player 5 – Red
Player 6 – White
Player 7 – Blue
Player 8 – Cyan
6. There are 13 selections of players from 1 player mode to 8 players' mode, plus the following 5 levels of the
computer players which you can continue to scroll through 9-13 and select:
Beginner,
Intermediate,
Advanced,
Expert,
Professional.
7. For some games, handicap mode can be selected. Player handicaps must be set before pressing ENTER.
When the number of players has been chosen but before ENTER has been pressed, press the HANDICAP
button to cycle through the handicap options. Enter will save the settings and move to the next level. The
games that use handicap mode are listed and explained further at the HANDICAP OPTIONS.
8. Press the VOLUME button to select the desired sound level. The Cricket displays will show the volume
level while adjusting. It is default at the middle volume whenever the power of the dartboard is turned on.
9. Press the VOICE button to select 3 modes of vocal responses and sound effects respectively for
operations, dart scoring, hackle features and special scores.
Mode 1 (default) – the operating instructions, calling scores and special scores are active.
Mode 2 – the operating instructions and calling scores are active.
Mode 3 – the operating instructions, calling scores and Heckles are active.
10. Press LIGHT EFFECT button to have light or no light effect.
11. When finishing a game, press ENTER to restart the same game or press and hold the RESET button for 2
seconds to return to the beginning of the same game.
12. To switch off the game, press and hold the ON/OFF button for 2 seconds.
13. The Board will automatically go into the power OFF mode if no button is activated for 15 minutes.
BUTTON FUNCTIONS: