E) Submenu "Image Adj; F) Submenu "Daynight - Sygonix 1498823 Bedienungsanleitung

e) Submenu "IMAGE ADJ"

This summarises all functions for setting the image. The setting functions are distributed across two screen pages; you
can switch between the two screen pages as usual with "NEXT" and "BACK".
The following functions are available:
"SHARPNESS"
"HDNR"
"CONTRAST"
"SATURATION"
"R GAIN"
"G GAIN"
"B GAIN"
"PARA I"
"PARA V"

f) Submenu "DAYNIGHT"

"EXT"
"AUTO GEN"
"COLOR"
"BLACKWHIT"
36
Image sharpness
Noise suppression
Contrast
Colour saturation
Set red ratio
Set green ratio
Set blue ratio
Do not change (for the manufacturer only)
The value cannot be set (is automatically changed and displayed by adjusting "PARA I")
Here, you can set a delay time ("D TIME") for activating the IR filter (1 - 100 seconds).
The camera switches between colour and black/white automatically depending on ambience
brightness in the basic setting.
Press the button to show a submenu:
"D CTRL": Delay time (1- 100 seconds) for switching between colour and black-and-white
display.
"DAY2NIGHT": Value of the ambience brightness (1 - 100 Lux) from which onwards the switch
from colour to black/white mode is performed
"NIGHT2DAY": Value of the ambience brightness (1 - 100 Lux) from which onwards the switch
from black/white to colour mode is performed
The video is always shown in colour, no matter the ambience brightness (if the ambience
brightness is low, there will be image noise for functional reasons).
The video is always displayed in black/white, no matter the ambience brightness.