Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13. Basic Functions in the Setup Menu of the
Surveillance Cameras
a) General
The surveillance cameras also have a comprehensive setup menu. The control lever used for operation is located in
the surveillance camera's connection cable. Different settings can be made in the setup menu.
To call the setup menu, activate a submenu or confirm a setting, briefly push the control lever (like a conventional
button).
The control lever can be moved in four directions to set a function or change a setting (see label next to the button):
"L"
Briefly move the control lever to the left
"R"
Briefly move the control lever to the right
"UP"
Briefly move the control lever up
"DOWN"
Briefly move the control lever down
A circle symbol ("
") indicates where you are in the menu.
b) Call/Leave the Setup Menu, Save Settings
Briefly push the control lever to call the setup menu. The
setup menu is displayed in the screen image; see exam-
ple figure on the right.
To save all settings, select "SAVE" and then briefly push
the control lever.
To leave the setup menu, select "EXIT" and then briefly
push the control lever. The setup menu display will then
disappear from the screen.
After leaving the setup menu without saving the settings with "SAVE", they will be lost if the power supply
is disconnected or a power outage occurs!
Therefore, do not forget to select "SAVE" first before leaving the setup menu and confirm by briefly pushing
the control lever. Then all settings made are retained when the power fails. Then you can leave the setup
menu via "EXIT".
c) Select Menu Items/Function/Settings
• By moving the control lever up, down, to the left or right briefly, you can select the individual menu items, functions
or settings.
• To confirm a selection, briefly push the control lever (as if it was a normal button).
• The menu item "NEXT" can be used to switch to the next page; "BACK" returns you to the previous page.
34
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
