XTAR VC2SL Bedienungsanleitung Seite 3

English-VC2SL USB L CD Li-ion/Ni-MH
Operation
. Charging Function
Connect power supply and insert batteries, the charger will automatically start charging.
II . OV Activation Function
nsert batteries, revivable batteries will start charging within 10 minutes.
Ill. Switch Display Information
Pressthe button to switch the display: CAP(capacity) CCR
(real-time charging current), and IR (internal resistance).
Note:
1. Display of CCR
When the battery voltage reaches 4.2V,CCR(real-time charging current) will gradually
decrease until it becomes
2. Display of IR
When battery is fully charged, the charger won' t measure inner resistance, in case
battery over-charged.
When the input current is lower than 700mA, it may lead to two consequences: A. the
measured inner resistancehasa largedeviation; B.the internal resistanceis not detected.
IV. Battery Type Auto-identification
nsert battery, the charger will automatically identify the battery type within 4 minutes,
with "Ni-MH" flickering on the screen.After identified, the screenwill show the battery
type.
V . USB Output Function (with Power-Path Management)
Charge USBdevices and the batteries at the same time. Or unplug the power supply,
insert Li-ion battery in the left slot (CHI) to charge USBdevice as a power bank.
Note:
Power-Path Management let USBdevice charged directly from the power supply instead
of the battery, which extends the battery lifespan.
Indicator Color Meaning
Green: standby/fully charged
Red: self-examining/charging/activating
No Light: power supply unconnected
Warranty
Please take the product (with warranty number) and receipt to get after-sales service.
15 days free replacement.
12 months free repain f problems develop beyond 12 months, we will offer free repair
service but charge for parts used.
Lifetime technical support.
Note:
I. Artificial damage are not included in the warranty.
2. If there is any question, please contact our after-sales email address: service@xtar.cc.
Anti-Fake
1 Scratch anti-counterfeiting label with care.
Youcanfind it (1)on the bottom ofthe product, or (2)on the package,18-digitnumber in total.
2. nput the number into the query pageon www.xtar.cc(Contact Us -Anti-fake).
Warning
When the power supply is insufficient, the charger will reduce the charge current
1.
correspondingly.
Do not charge unsuitable batteries with the charger.
2.
Keep the charger away from humidity, water, and excessive dust.
3.
Please operate the charger in a well-ventilated area. Remove all batteries and unplug
4.
the charging unit from the power source when not in use.
5. Children should use the charger accompanied by an adult.
Do not disassemble or use the charger if it is damaged.
6.
For more and updated info, please visit www.xtar.cc.
7.
OA.
Battery Charger