Technical Data; Declaration Of Conformity; Safety Instructions - Wolff Rumba 019646 Betriebsanleitung

1.0 Technical Data

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V 50 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 W
No-load speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 rpm
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .54 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . .67 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . .< 4,5 m/s2
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 kg
Diameter of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330 mm
2.0

Declaration of conformity

We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50144, according to the provisions of the
Directives 2006/42/EC.
Vaihingen/Enz, 01.03.2010
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried out.
Use only recommended mounting discs and brushes. The
mounting discs must have a plain surface.
Use only genuine Wolff discs and brushes. Other parts could
affect the safety of the machine. Maintenance should be under-
taken only by qualified personnel. Use only genuine WOLFF
spare parts. Use only appropriate detergent liquids.
Have damaged insulation repaired at once, before starting the
machine. Otherwise this may result in considerable danger to
the user. See supplementary sheet "General safety instructions"
3.1 Introduction
This operating manual should be used to get the most benefit
from your Grinding machine RUMBA. Following these instructions
will both extend the life of your machine and reduce repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The Polishing machine RUMBA is designed to the highest
technical standards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at once.
03/2010
Comes with:
Polishing machine RUMBA
Tool kit
Operation manual
Accessories: (325mm discs)
Shampoo brush soft
Polishing brush hard
Mounting disc for pads
Polishing pads
Paper grinding disc, grade 40
Paper grinding disc, grade 60
Check the power cord and the plug before starting.
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
013521
013522
013520
013523
013524
013525
9