Fitting The Bathrobe Hooks; Electrical Connection; Troubleshooting; Appliance Handover - STIEBEL ELTRON BHE 75 Classic Bedienunganleitung

INSTALLATION

Troubleshooting

9.4

Fitting the bathrobe hooks

1
1 Bathrobe hook
2 Washer
3 Bathrobe hook backplate
f Fit the bathrobe hooks as shown. f
9.5

Electrical connection

WARNING Electrocution
In wet rooms such as shower rooms and kitchens, install
the flush box at least 25 cm above the floor.
WARNING Electrocution
Never operate the appliance with an extension cable or
a multiple socket.
Material losses
!
Ensure the appliance can be separated from the power
supply by an isolator that disconnects all poles with at
least 3 mm contact separation. For this, use contactors,
mains isolators, fuses, etc. Installation with a permanent
power cable is not permitted.
Material losses
!
Observe the type plate. The specified voltage must match
the mains voltage.
Note
Carry out all electrical connection and installation work
in accordance with national and regional regulations.
Note
Ensure a standard socket or junction box for a permanent
power supply is installed at a distance of at least 10 cm
from the side of the appliance.
10. Troubleshooting
The power cable must only be replaced by a qualified contractor
using original spare parts.
www.stiebel-eltron.com
2

11. Appliance handover

f Explain the functions of the appliance to the user. f
3
f Draw special attention to the safety instructions. f
f Pass on the operating and installation instructions to the f
user.

12. Specification

12.1 Dimensions

BHE 75-100 Classic
446
e19
a10 Appliance Height
a30 Appliance Depth
e07 Ventilation Female thread
e18 Flow Female thread
e19 Return Female thread
i13 Wall mounting Vertical hole spacing
bracket
Horizontal hole spacing
550
a30
i13
80
e18
BHE 75
Classic
mm
mm
G 1/2
G 1/2
G 1/2
mm
mm
BHE Classic |
BHE 100
Classic
1225 1749
85 85
G 1/2
G 1/2
G 1/2
1066 1599
400 400
21