Hydraulic Connection (When Integrating Into A Dhw/Central Heating System) - STIEBEL ELTRON BHE 75 Classic Bedienunganleitung

INSTALLATION
Installation
Note
Note the alignment of the wall sleeves.
f Use screws to secure the wall sleeves. f
f Secure the retainers to the rungs. Do not yet tighten the f
retainers.
BHE 75-100 Classic
20 | BHE Classic
BHE 175 T Classic
f Guide the retainers into the wall sleeves to join the appliance f
to the wall.
f Align the appliance. f
f Tighten the retainer screws and the lock screws. f
9.3 Hydraulic connection (when integrating into a
DHW/central heating system)
Note
Observe the dimensions and minimum clearances in
chapter "Specification".
f Integrate the appliance into the DHW/central heating system f
by connecting the flow and return connectors to the on-site
water connections.
f Connect a thermostatic valve at the flow connector. f
f When filling the appliance, bleed it using the air vent valve. f
www.stiebel-eltron.com