Settings; Setting The Call Signal Volume; Additional Jacks; Connection Jack For Vibrating Pillow - HumanTechnik scalla1 Bedienungsanleitung

Settings

Setting the call signal volume

The telephone's ringer volume can be set by
means of the both buttons
the right sight of the telephone.

Additional jacks

Connection jack for vibrating pillow and/
or modules
Your telephone is equipped with a connec-
tion jack for a vibrating pillow or other addi-
tional signaling modules. You can take ad-
vantage of this option to signal an incoming
call not only with a very loud ring and the
very bright flashing light, but also with an
optionally available vibrating pillow and/ or
other module.
In addition to the acoustic ring tone, you can
choose whether you also want incoming calls
to be signaled visually, with vibration or with
both. To select the desired type of signaling,
slide the signal switch (on the back of the tel-
ephone) to one of three possible positions:
- Switch left: Visual with signals via a con-
nected vibrating pillow and/ or module
- Switch in the middle: Signal via a connec-
ted vibrating pillow and/ or module
- Switch right: Visual only
/ /
and on
The following optional modules can be con-
nected to the telephone:
- Flash module
- Switch module
- Acoustic module

Headset jack

Standard headset port with a 2.5 mm jack
(for connecting a PL-100/ PL-200, for exam-
ple).

Headphone jack

Headphone output (3.5 mm jack plug) to
connect a headphone, teleloop or similar.
English 25