Commissioning A Lifting Column With An External Controller - Phoenix Mecano Rk Rose+Krieger Rkpowerlift Montageanleitung

Working life
7.9.2

Commissioning a lifting column with an external controller

•
Test the safe state of lifting column 1.
•
Connect the lead 2 for the external controller either to a
RKMultiControl mono- or to a RKMultiControl duo
controller (see controller user manual).
•
If applicable, connect a second lifting column to the
controller.
•
Connect the hand switch to the controller (see
controller user manual).
•
Plug the mains lead into mains connection 3.
•
Set the lifting column sequence (see controller user
manual).
•
Carry out an initialisation run (see controller user
manual).
•
Note when raising and lowering the lifting column that
this operates the limit switch and at the same time
switches the lifting movement off in the top and bottom
end positions.
48
3
1
in the example, telescopic RKPowerlift
2