Commissioning A Lifting Column With Integrated Controller (Start-Stop) - Phoenix Mecano Rk Rose+Krieger Rkpowerlift Montageanleitung

7.9.1

Commissioning a lifting column with integrated controller (Start-Stop)

•
Test the safe state of lifting column 1.
•
Plug the hand switch into socket 2.
•
Plug the mains lead into mains connection 3.
•
Plug the plug on the end of the mains lead into a mains
socket.
•
Test by carefully pressing the relevant key on the hand
switch the function for moving the lifting column up and
down.
•
Note when raising and lowering the lifting column that
this operates the limit switch and at the same time
switches the lifting movement off in the top and bottom
end positions.
2
3
1
in the example, telescopic RKPowerlift
Working life
47