Proper Use; Technical Data - Parkside PABSW 10.8 A1 Bedienungs- Und Sicherheitshinweise

4. Proper use

The cordless drill is designed for tightening and
undoing screws, as well as for drilling in wood,
metal and plastic.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Voltage supply .......................................10.8 V d.c.
Idling speed: ..........................0-300/0-1050 rpm
Torque settings: ................................................17+1
Forward and reverse rotation ............................ yes
Chuck clamping width .............................. 1-10 mm
Battery type: ...........................................Lithium-ion
Battery pack capacity: ................................ 1.3 Ah
Number of cells: .................................................... 3
Battery charging voltage.......................10.8 V d.c.
Battery charging current ...........................1500 mA
Mains voltage for charger .... 100-240 V ~ 50 Hz
Weight ............................................................1.0 kg
Max. screw diameter: .................................... 6 mm
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ....................... 65.3 dB(A)
pA
K uncertainty .................................................3 dB
pA
L sound power level .........................76.3 dB(A)
WA
K uncertainty ................................................3 dB
WA
Anl_4513645.indb 12 Anl_4513645.indb 12
GB/IE/CY
Wear ear-muffs.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
K uncertainty = 1.5 m/s
Screwing without hammer action
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful effect.
Keep the noise emissions and vibrations
to a minimum.
•
Only use appliances which are in perfect
working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appli-
ance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 12 -
2
< 2.5 m/s
h
2
< 2.5 m/s 2
h
2
27.11.12 14:18 27.11.12 14:18