Servicing The Tool; Parts List - Avdel TX2000 Betriebsanleitung

S e r v i c i n g t h e To o l
IMPORTANT: The employer is responsible for ensuring that tool maintenance instructions are given to the
appropriate personnel. The operator should not be involved in maintenance or repair of the tool unless
properly trained. The tool must be examined regularly for damage and malfunction.
The following service checks should be performed:
D a i l y
•
Check for oil leaks*.
•
Check that the nose assembly is correct for the fastener to be placed. Please refer to page 7.
We e k l y
•
Check for oil leaks*.
•
Dismantle and clean the nose assembly with special attention to the jaws using the following procedures:
•
Remove the nose equipment using the reverse procedure to the instructions
for changing nose equipment on page 12.
•
Any worn or damaged part should be replaced.
•
Clean and check wear on jaws.
•
Ensure that the jaw spreader is not distorted.
•
Check spring 7 is not distorted.
•
Assemble according to the fitting instructions on page 12.
A n n u a l l y
Please return your tool to your local Avdel
P a r t s L i s t
Part No. Description
07007-01954 Battery (Ni-Cd 12V/2.0 Ah)
07007-01977 Battery (Ni-MH 12V/2.2 Ah)
71600-02024 Nose tip spanner
07007-01965 Battery charger: 220/240V~50Hz (UK)
07007-01966 Battery charger: 220/240V~50Hz (Europe)
07007-01967 Battery charger: 220/240V~-50Hz (Australia)
07007-01968 Battery charger: 110V~60Hz (USA/Canada)
07007-01969 Battery charger: 100V~50/60Hz (Japan)
07007-01960 Storage case
07900-00759 Tool Instruction Manual - UK version
07992-00020 Moly-lithium grease
07992-00076 Hyspin
07992-00077 Hyspin
07900-00754 Priming pump
* please refer to page 17 for relevant safety data
(or every 500,000 cycles, whichever is the soonest)
®
authorised distributor or repair centre.
please refer to page 7 for nose tip part numbers
®
AWS 15 oil (0.5 litre)
®
AWS 15 oil (1 gallon)
13