Specifications - Avdel TX2000 Betriebsanleitung

S p e c i f i c a t i o n s
To o l S p e c i f i c a t i o n
Stroke
Pull Force
Operating Voltage
Cycle time
Noise Level
Vibration
Weight
The tool will be supplied with either of the two charger types listed below. To identify the correct type, please refer to
the specification number on the charger label.
C h a rg e r S p e c i f i c a t i o n A P - H B W / t u 1 2 0 3
Input Supply
Output Supply
Charging Time
Intelligent Charger
Battery Type
Weight
C h a rg e r S p e c i f i c a t i o n A P - U L E - 1 2 0 1 & A P / U L U J - 1 2 0 1
Charger Type
Input Supply
Output Supply
Charging Time
Advanced Intelligent
Charger
Battery Type
Weight
B a t t e r y S p e c i f i c a t i o n
Output Voltage
Capacity
Number of Cells
Cell Construction
Weight
Minimum - Maximum
Minimum
Approx. @ Full Stroke
Less than
With nose equipment
UK/Europe/Australia
USA/Canada/Japan
12 V/2.0 Ah battery
Charges according to remaining battery charge
Suitable for cell chemistry Ni-Cd and Ni-MH
AP/ULE-1201 and AP/ULUJ-1201
UK/European/Australian Specification
USA/Canada/Japan Specification
12 V/2.0 Ah Ni-Cd battery (90% Capacity)
12 V/2.0 Ah Ni-Cd battery (100% Capacity) 50 minutes
Patented design. Charges according to remaining battery capacity with automatic
trickle charge to achieve optimum battery capacity
Suitable for charging both Ni-Cd and Ni-MH cell chemistry with a capacity
of 1.2Ah-3.0Ah.
12V DC
2.0 Ah
10
Ni-Cd (with NTC thermal overcharge protection)
0.65 kg (1.43 lb)
22.0 mm (0.866 in)
11.0 kN (2444 lbf)
12V DC
2.0 seconds
70 dB(A)
2 2
2.5 m/s (8 ft/s )
2.5 kg (5.51 lb)
220/240 V (50 Hz)
110V (60 Hz)
12 V (3A)
40 minutes
0.440 kg (0.97 lb)
220-240 V 50-60 Hz
100-110V 50-60 Hz
12 V 3A
40 minutes
0.5 kg 1.1 lb
5