Setting Up The Bbq; Before Grilling - tepro GRENADA Bedienungsanleitung

9. Attach the brackets for the side racks
Remove the nuts and stick the brackets
for the side racks (13, 14) on the screws
already installed on the BBQ body.
Fasten the brackets using the nuts. Pay
attention to the positions of the brackets
(13, 14):
13
9
10. Attach the side racks
Hang the two side racks (12) onto the
brackets (13, 14).
13
12
Disassemble the BBQ in the reverse order.
Important: All screws must be tightly
fastened.
P160175_TEPRO_1154_Grenada_K.indb 27

Setting up the BBQ

Attention Risk of damage!
– Check the stability of the screws prior
to each use. If necessary, tighten all of
14
the screws again to ensure the BBQ is
13
standing securely.
• Before use, place the BBQ on an even,
sturdy surface outdoors.
14

Before grilling

• Using warm, soapy water, wash down
the BBQ grate and the BBQ grate insert
(5) before first use.
• Pre-firing
Prior to the first grilling, the BBQ
must be pre-fired for a minimum of
30 minutes at a temperature of
100 °C - 200 °C.
14
This is necessary in order to make the
inside ready for barbecuing.
During use, the screws can
loosen slowly and impair the
BBQ's stability.
t
27
8/11/16 10:41 AM