Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
t
Assembly
Preparation
Danger Risk of injury!
Failure
instructions
problems and risks while using
the BBQ.
– Follow all of the assembly instructions
listed here.
1. First read through the assembly
instructions completely.
2. Take sufficient time for the assembly
and establish an even work surface of
one to two square metres.
3. Small parts such as handles will
probably be preassembled.
4. Look out for sharp corners and wear
protective gloves for assembly.
5. Attention! The BBQ body is very
heavy! Two people are needed for the
assembly.
required tools
1 x Phillips screwdriver
1 x Adjustable spanner
Assembling the BBQ
1. unpack BBQ
Unpack the BBQ and dispose of all
packaging materials. Keep the packaging
materials out of the reach of children and
dispose of them according to regulations
after BBQ assembly. Pay attention to the
illustration of the BBQ during assembly.
24
P160175_TEPRO_1154_Grenada_K.indb 24
to
follow
these
can
lead
to
2. Attach the castors
Stick the castors (2+3) through the holes
in the support legs (1) and fasten them in
place using a snap ring (E) and a domed
nut (B).
2
3. Insert cross connections
Slide the cross connections for the
support legs (4) above and below into the
brackets of a support leg (1).
1
4
1
8/11/16 10:41 AM
Werbung
Kapitel
Inhaltsverzeichnis
