Setting Up The Bbq - tepro HIGHLAND Bedienungsanleitung

t
7. Fasten the wind shield
Connect the left and right wind shield
(5, 6) with the M5 x 10 screws (e)
and the M5 hexagonal nuts (C). The
horizontal slots must face each other.
When assembling the two parts of the
wind shield, four oval holes that serve
as slots for the BBQ grate (3) and the
warming grille (8) are formed in the
middle. Make sure that the oval holes
are large enough to accommodate
the BBQ grate bracket. Place the
assembled wind shield in the fire bowl
(1) and fasten it with the M5 x 10 screws
(e) and the M5 hexagonal nuts (C).
20
Downloaded from www.Manualslib.com
5+6
manuals search engine
8. Attach the BBQ grate
Place the BBQ grate (3) and the
warming grille (8) on the grill at the
desired height. Hook the BBQ grate
handles (13) to the two small crossbars
on the BBQ grate to attach or adjust
the BBQ grate. The BBQ has been
completely assembled. Disassemble
the BBQ in the reverse order.
13
1
Important: All screws must be tightly
fastened.

Setting up the BBQ

Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
BBQ's stability.
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
8