Setting Up The Bbq; Before Grilling - tepro TORONTO CLICK Bedienungsanleitung

Step 20
Step 21
Important: All screws must be
tightly fastened.
28
P160169_TEPRO_1161_TorontoClick_DE_GB.indb 28

Setting up the BBQ

Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
BBQ's stability.
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
• Before use, place the BBQ on an even,
sturdy surface outdoors.

Before grilling

• Prior to first use, wash the BBQ grate
and the warming grille with warm
soapy water.
• Pre-firing
Before you use the BBQ for the first
time, it needs to be conditioned (pre-
fired) for at least 1-2 hours at a tem-
perature of 100 °C- 200 °C.
This is necessary in order to make the
inside ready for barbecuing and to burn
in the heat-resistant paint on the out-
side. During the pre-firing, the cover
should not be completely closed. Only
close the cover completely for a few
minutes at the end.
Attention: During the pre-firing, the
temperature must not exceed 260 °C.
4/10/16 9:41 AM