CGS Instruments SAM-1000_DP Bedienungsanleitung Seite 65

Figure 6-2 Parameter screen 1/4
In the parameter screen 1 every analysis point can be given a name. With the button at the right side
of the name the visibility of the analysis point on the state screen is set.
„Local" Enable/disable local operation at the panel
„Fuse" Enable/disable the display of fuse control
„PSL" Enable/disable the display of pressure monitoring
„FSL" Enable/disable the display of flow monitoring
visible / enabled
invisible / disabled
Product:
SAM-1000_DP Revision 1.2 – Issue July 2016
E
65/88