Flowmeter - Cgs Instruments Sam-1000_Dp Bedienungsanleitung

E
Figure 6-5 Parameter Screen 4/4
Displaying of the 4 analog input signals as a raw value. Input 1 shows the pressure.
Valid values are between 0...27648. Other values means signal faults.

6.2 Flowmeter

• The actual operating pressure and the medium temperature of the system must not exceed the maxi-
mum values of the flowmeter.
• Impact shocks are to be avoided (risk of broken glass). -> Slowly increase the gas pressure.
• Use the needle valve to adjust the desired flow rate.
• The flow rate value is read at the upper edge of the float.
shape
reference point
Product:
SAM-1000_DP
A III ball
Revision 1.2 – Issue July 2016
68/88