ENFORCER BIONIC FOOT Gebrauchsanweisung Seite 65

3.15 The self-diagnosis procedure
The self-diagnosis procedure allows you to check individual functionalities of the product. There are
several tests to choose from:
1. The peripheral test allows you to determine whether all prosthesis components are functional.
2. Measurement test The measurement test allows you to determine whether the measurements
made by the prosthesis sensors are correct.
3. The charging test allows you to determine whether the charging of the prosthesis is working
properly, during this test you must connect the charger in accordance with the recommendations
for charging the prosthesis.
4. The LED display test allows you to check whether all LEDs on the display are working
properly. The display will change color during the test.
5. The damper test allows you to determine whether the prosthesis damper is working properly
and has not been damaged.
Figure 23: Statistics screen (a) and steps target edit screen (b).
INSTRUCTIONS FOR USE (ENG)
64