Operation Instructions - Enforcer Bionic Foot Gebrauchsanweisung

1.3 Prosthetic foot selection
Attention:
The prosthetic foot is individually selected based on the patient's current weight. If
there is a change in weight, the patient should promptly notify medical personnel to
ensure proper adjustment and continued optimal use of the prosthetic
Attention:
The device can only be configured and fitted to the patient by authorized individuals,
specifically trained medical personnel.
Any use of the device beyond the recommendations provided in this manual should undergo a thorough
and individual evaluation by the medical personnel responsible for the prosthesis, who should be
familiar with the patient's medical history.
The table below contains information on the appropriate selection of a prosthetic foot for the patient's
weight.
Body weight (kg)
1.4 Limitations
The product is not intended for use in active sports.

2. Operation instructions

2.1 ON/OFF
The device can be activated when worn on a limb by taking a step with a firm heel strike against the
ground. Alternatively, it can be activated while sitting by lightly striking the ground from a height of
about 5 cm. Activation is indicated by an LED ring, and an animation is displayed as shown in the
Table 1.
The device automatically turns off after 2 minutes of inactivity. Shutdown is indicated by the LED ring,
and an animation is displayed as shown in the Table 1.
<60
Type P3
INSTRUCTIONS FOR USE (ENG)
<80 <100
P4 P5
40