ENFORCER BIONIC FOOT Gebrauchsanweisung Seite 59

INSTRUCTIONS FOR USE (ENG)
3.11 Management of modes
The default operating mode of the prosthesis is walking mode. To go to the mode management panel,
click the icon (5) in Figure 15. Then change the mode by clicking on the appropriate icon - bicycle,
home or ladder mode (Figure 16). The currently selected option is highlighted in green. Changing to the
default walking mode is possible by clicking again on the active mode (marked in green) - when no
mode (bicycle, home or ladder) is highlighted in color, the prosthesis works in the default walking mode
.
Figure 15: Main Screen.
Figure 16: Changing prosthesis mode.
58