Yamaha MG206C-USB Bedienungsanleitung Seite 30

Reference
Specifications
■ Analog Input Specifications
Input Connectors Gain
-60 dB
CH INPUT MIC
(CHs 1–8)
-16 dB
-34 dB
CH INPUT LINE
(CHs 1–8)
+10 dB
-60 dB
ST CH MIC INPUT
(CHs 9/10, 11/12)
-16 dB
-34 dB
ST CH LINE
INPUT
(CHs 9/10, 11/12)
+10 dB
ST CH INPUT
—
(CHs 13/14, 15/16)
CH INSERT IN
—
(CHs 1–8)
RETURN (L, R) —
2TR IN (L, R) —
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to
the maximum level. (All faders and level controls are at their maximum position.)
■ Analog Output Specifications
Output Connectors
STEREO OUT (L, R)
GROUP OUT (1–4)
EFFECT/AUX* SEND
CH INSERT OUT
(CHs 1–8)
REC OUT (L, R)
MONITOR OUT (L, R)
PHONES OUT
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* MG166CX-USB: AUX1, 2, EFFECT
MG166C-USB: AUX1, 2, 3
■ Digital Input/Output Specifications
Connector
USB
102
MG206C-USB/MG166CX-USB/MG166C-USB Owner's Manual
Input Appropriate
Sensitivity *
Impedance Impedance
(0.078 mV)
50–600Ω
3kΩ
Mics
(12.3 mV)
(1.55 mV)
600Ω
10kΩ
Lines
(245 mV)
(0.078 mV)
50–600Ω
3kΩ
Mics
(12.3 mV)
(1.55 mV)
600Ω
10kΩ
Lines
(245 mV)
600Ω
10kΩ
Lines (24.5 mV)
600Ω
10kΩ
Lines (77.5 mV)
600Ω
10kΩ
Lines (195 mV)
600Ω
10kΩ
Lines (50.1 mV)
Output Appropriate
Impedance Impedance
75Ω 600Ω Lines
150Ω 10kΩ Lines
150Ω 10kΩ Lines
75Ω 10kΩ Lines
600Ω 10kΩ Lines -10 dBV (0.316 V)
150Ω 10kΩ Lines
100Ω 40Ω Phones
Format
USB Audio 1.1
Nominal Max. before
Level Clipping
-80 dBu -60 dBu
(0.775 mV) (7.75 mV)
-36 dBu -16 dBu
(123 mV)
-54 dBu -34 dBu
(15.5 mV) (155 mV)
-10 dBu +10 dBu
(2.45 V)
-80 dBu -60 dBu
(0.775 mV) (7.75 mV)
-36 dBu -16 dBu
(123 mV) (389 mV)
-54 dBu -34 dBu
(15.5 mV) (155 mV)
-10 dBu +10 dBu
(2.45 V)
-30 dBu -10 dBu
(245 mV)
-20 dBu 0 dBu
(0.775 V)
-12 dBu +4 dBu
(1.23 V)
-26 dBV -10dBV
(0.316V)
Max. before
Nominal Level
clipping
+4dBu (1.23 V) +24 dBu (12.3 V)
+4dBu (1.23 V) +20 dBu (7.75 V)
+4dBu (1.23 V) +20 dBu (7.75 V)
0 dBu (0.775 V) +20 dBu (7.75 V)
+10 dBV (3.16 V)
+4 dBu (1.23 V) +20 dBu (7.75 V)
3 mW 75 mW
Data Length Connector Specification
16 bit
Connector Specifications
-40 dBu
XLR-3-31 type (balanced [1 = GND, 2
= HOT, 3 = COLD])
+4 dBu
(1.23 V)
-14 dBu
TRS phone jack (balanced [Tip =
HOT, Ring = COLD, Sleeve = GND])
+30 dBu
(24.5 V)
-40 dBu
XLR-3-31 type (balanced [1 = GND, 2
= HOT, 3 = COLD])
-6 dBu
-14 dBu
Phone jack (unbalanced)
+30 dBu
(24.5 V)
+10 dBu Phone jack (unbalanced)
(2.45 V) RCA pin jack
+20 dBu TRS phone Jack (unbalanced [Tip =
(7.75 V) Out, Ring = In, Sleeve = GND])
+24 dBu
Phone jack (unbalanced)
(12.3 V)
+10dBV
RCA pin jack
(3.16 V)
Connector Specifications
XLR-3-32 type (balanced [1 = GND, 2 =
HOT, 3 = COLD])
TRS phone jack (balanced [Tip = HOT, Ring
= COLD, Sleeve = GND])
TRS phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
TRS phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
TRS phone jack (unbalanced [Tip = Out,
Ring = In, Sleeve = GND])
RCA pin jack
TRS phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
TRS phone jack
USB B type