Battery Removal And Installation - Ulefone Rugone Xever 7 Pro Benutzerhandbuch

eSIM
You device has a built-in eSIM, a sigital SIM that allows you to activate a cellular plan
without a physical card. This makes it more secure, as itr can't be removed if your phone
is lost or stolen. You can use either the eSIM or SIM Card 2, but not both at the same
time.
Note: eSIM support varies by carrier and region. Please check with your local provider
for details.
Enabling eSIM: Go to Settings > Network & Internet > eSIM. eSIM activation required a
restar and will desable SIM2 while disabling eSIM will reactivate SIM2 and restart your
device.
Adding plan: Go to Settings > Network & Internet > SIMs > Add SIM >Set up an eSIM,
scan the QR code from your carrier to activate the eSIM.
Delete: In Settings > Network & Internet > SIMs, tap the eSIM you wish to remove.
Note: Deleting an eSIM does not cancel your cellular plan. You must contact your carrier
to cancel the plan itself.

Battery Removal and Installation

Note: Keep the battery cover clean when swapping batteries.
Slide the battery cover
latch to unlock.
Pry the cover off.
Place the battery
in the slot.
Lift the battery out.
Slide the latch to lock.
Snap the cover on.
5