uleFone RugOne Xever 7 Pro Benutzerhandbuch Seite 13

Tuning
The camera has a mechanical shutter inside that periodically activates and allows the
thermal camera to perform calibration or image refresh.
When the shutter activates, the image will freeze briefly.
The purpose of the shutter is to allow the camera to provide an improved image.
The phone performs tuning automatically on a periodic basis. Note: When the Spot
Meter is turned on, tuning occurs more frequently.
Measuring Temperature with Spot Meters
Use the Spot Meter to measure surface temperatures, either on a saved thermal image
or from the live thermal camera feed.
Tap Spot Meter icon, then again from the submenu that appears below.
•
A Spot Meter appears on the display with a temperature reading.
•
Tap and drag the Spot Meter to another point. You can add up to five Spot
•
Meters.
Tap and hold over a Spot Meter to delete it.
•
From a Previous Image
Tap Gallery icon, then tap the Edit icon.
•
Tap the Spot Meter icon again from the submenu.
•
A Spot Meter appears on the display; tap and drag it to your chosen position.
•
You can add up to five Spot Meters. Tap and hold over a Spot Meter to delete it.
•
Notes
To switch between Celsius and Fahrenheit in the live thermal camera feed, select
•
Menu > Settings, then slide the Temperature Unit switch.
Changing colour palettes: You can select from a range of visualizations for
•
different temperatures by selecting the Colour Palette icon, and choosing from
nine colour schemes.
13