uleFone RugOne Xever 7 Pro Benutzerhandbuch Seite 10

Thermal Imaging Camera
Specifications
Thermal Imaging Module
Resolution
Field of View (FOV)
Radiometry
Sensor Technology
Effective Frame Rate
Input Clock
Output Format
Pixel Size
Scene Dynamic Range
Spectral Range
Temperature
Compensation
Thermal Sensitivity
Video Data Interface
Non-Operating
Temperature Range
Optimum Temperature
Range
Shock
Array Format
FOV – Horizontal
Image Optimization
Non-Uniformity
Correction (NUC)
Solar Protection
Input Supply Voltage
Power Dissipation
FLIR® Lepton® 3.5
160×120
57°
With shutter
Uncooled VOx microbolometer
8.7 Hz (commercial application exportable)
25 MHz nominal, CMOS IO voltage levels
User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB
(AGC and colourization applied)
12 µm
-10 to 140 °C (high gain); up to 450 °C (low gain) typical
Longwave infrared, 8 µm to 14 µm
Automatic. Output image independent of camera
temperature
<50 mK (0.050 °C)
Video over SPI
-40 °C to +80 °C
-10 °C to +80 °C
1500 G @ 0.4 ms
160 × 120, progressive scan
57° (nominal)
Factory configured and fully automated
Automatic with shutter
Integral
2.8 V, 1.2 V, 2.5 V to 3.1 V IO
150mW (operating), 650mW (during shutter event),
4mW (standby)
10