TROUBLESHOOTING
DISPLAY
F0
Fc
Ft / FE
Fb
FU / FJ
FA / FC / Fd
Fr
CLEANING & MAINTENANCE
Remove any residues of food and drops of
grease from the cooking surface by using
the special scraper supplied on request
(Figure 6).
Clean the heated area as thoroughly as
possible using suitable products and a
cloth/paper, then rinse with water and dry
with a clean cloth. Using the special scrap-
er immediately remove any fragments of
aluminium and plastic material that have
unintentionally melted on the heated cook-
ing area, or residues of sugar or food with a
high sugar content.
FAULT
Touch control
software error.
Touch control zone is too
hot and has turned off all the
heaters.
Touch control temperature
sensor can be damaged.
Touch control temperature
sensor can be damaged.
Excessive sensitivity on any
key.
Security keyboard error.
Relays security error
ACTION
If error has occurred disconnected and
connect again the cooktop to the power
supply. If error persist, call after-sales ser-
vice. If error appears suddenly in a normal
operation, call after-sales service.
Wait until temperature goes down. Cook-
top will automatically recovered when
temperature reaches a normal value.
Wait until temperature goes down. If mes-
sage persist when temperature reaches an
environment value, call after-sales service.
See if cook-top is mounted correctly. Be
sure that keys touch correctly the glass
surface.
This error is a keyboard auto-check. It
disappears when auto check return to
secure value. If error persist, call after-sales
service.
This error is a software auto-check. It dis-
appears when auto-check return to secure
value. If error persist, call after-sale service.
Any relay driver can have any problemn.
Remove cook-top from the power supply,
wait a minute and switch on again. If error
persist, call after-sale service.
In this way, any damage to the cooktop sur-
face can be prevented. Under no circum-
stances should abrasive sponges, or cor-
rosive chemical detergents, such as oven
sprays or stain removers, be used.
WARNING: Steam cleaners must not be
used.
15