Control Panel; Switching The Appliance On - Pyramis Phc61631Bfb Installations-, Betriebs- Und Wartungsanleitung

3. CONTROL PANEL

I*
I*
F
E
E
G*
F
A
D
A. ON / OFF key
B. Lock key
B*. LED - lock function
C. Power increase key
D. Power decrease key
E. Zone selection key
F. Cooking zone power display
G. Zone extension key
G*. LED - zone extension function
H. Timer key
I. Timer display
I*. LED - timer function

4. SWITCHING THE APPLIANCE ON

Press the On-Off key to switch the hob on.
All the cooking zones displays switch on in
the '0' standby position.
The control unit remains active for 10 sec-
onds. If no cooking zone is selected within this
time, the appliance switches off automatically.
NOTE: after connecting it to the power sup-
ply the appliance is in safe mode, the Control
Lock is enabled. In order to use the appliance
remove the lock by pressing the Lock key.
5. SWITCHING A COOKING ZONE ON
Select the desired cooking zone by press-
ing the Zone Selection key. The display of
the active zone will show '0'. Adjust the de-
sired cooking level using the '+' and '-' keys
within 10 seconds. Press the Zone Selec-
tion key to confirm the setting.
I*
H
F
I*
F
I
G*
E
E
G
F
B*
C
B
The power of the single cooking zone can
be adjusted in 9 different positions and will
be shown on the relative luminous display
with a level from '1' to '9'.
6. COOKING ZONE EXTENSION (2nd ZONE)
The appliance is equipped with a double
size cooking zone which combines inner
and outer cooking areas and is recommen-
ded for larger cookware, large quantities of
food, and home canning.
To activate the second circuit of the cook-
ing zone select it and adjust the power then
press the Zone Extension key. The LED (G*)
lights up to indicate the activation.
To disable the extension of the cooking
zone press the Zone Extension key. The
LED (G*) goes off.
7. RESIDUAL HEAT 'H'
If the temperature of the cooking zone is still
high (over 50°) after it has been switched
off, the relative display will indicate the 'H'
symbol (residual heat). The symbol will only
switch off when the burn risk in no longer
present.
8. TIMER
This function allows you to set the time from
'1' (1 minute) to '99' (99 minutes) for the au-
tomatic switch off of a cooking zone.
To activate the Timer on a cooking zone, se-
lect it, adjust its power then press the Timer
key. The corresponding LED (I*) located on
one of the corners of the Timer display blinks.
At this point you can adjust the time acting on
the '+' and '-' keys. Press the corresponding
Zone Selection key to confirm the settings.
13