Connection Diagram; Set Up The Camera - Reolink Rp-Pct8Md Bedienungsanleitung

Connection Diagram

Before using the camera, please connect your camera as instructed
below to finish initial setup.
1. Connect the camera to a Reolink NVR (not included) with an
Ethernet cable.
2. Connect the NVR to your router, and then power on the NVR.
NOTE: The camera should be powered with a 12V DC adapter or a
PoE powering device such as PoE injector, PoE switch or Reolink NVR
(not included in the package).
Power Adapter
Reolink NVR
* You may also connect the camera to a PoE switch or PoE injector.
NOTE:
Upon successful power-up, the infrared lights will turn on and stay on
for about 5 to 10 seconds, and then automatically turn off.
5 English
Router
Ethernet Cable

Set up the Camera

Download and launch the Reolink official app & client and follow
the onscreen instructions to finish the initial setup.
• On Smartphone
Scan to download our official app from the App Store or Google
Play Store.
• On PC
Download path of the Reolink VMS Client: Go to
> Support > App & Client.
NOTE: To connect the camera to a Reolink NVR, use the NVR interface
for setup. For more compatibility details, please contact Reolink
Support.
https://reolink.com
English 6